Luboil Viscosity Index Improver VI Modifer Two Shaft Crusher for Crushing Ethylene Propylene Rubber Gel Glue Bulks Chunks Blocks Solid Bales

• After-sales Service: 1 Year
• Warranty: 1 Year
• Type: Ethylene Propylene Bale
• Raw Material: Lubricant Oil VI Improver
• Structure: Top Feed
• Knife Classification: Claw Knife Crusher
• Model NO.: PC-18.5
• Knife Roll: Solid Knife Roller
• Automation: Non-Automatic
• Application 01: Ethylene Propylene Rubber Melting
• Heating System: Yes
• Application 02: Luboil Viscosity Improver Melting
• Application 03: for Polymer Bale for VI Modifier
• Application 04: for VI Improver
• Application 05: for VI Imodifier
• Application 06: for Hot Melt Lubricant Oil Additive Polymer
• Transport Package: Wooden Case
• Origin: China
• HS Code: 8479820090
• Production Capacity: 110 Sets

Product Description

Two shaft crusher/cutter special for Luboil Viscosity Index Improver Ethylene Propylene Rubber Gel Glue Bulks Chunks Blocks Solid Bales 
 

Product Description

1. What is the viscosity index improver or VI improver or VI imodifier?

Lubricating oil viscosity index improver is a high molecular weight compound polymerized from low molecular weight monomers. The monomers can be the same molecule or different molecules. It forms a solid gel or powder gel form. It is difficult to dissolve in oil at normal oil temperatures. Therefore, before adding oil, it needs to be dissolved with low-viscosity base oil at a certain temperature. The control of the viscosity index agent production process directly affects its performance.

2. How to make viscosity index improver with a high speed shear emulsifying dissolver mixer reactor with heating system?

It mainly includes five processes: base oil feeding, base oil heating, dry glue/gel bulk crusher and feeding, melt glue/gel and dilution, and discharging.

The specific steps are as followed:

1) Put the base oil into the viscosity index improver high speed dissolver mixer tank according to the formula ratio and preheat it.
2) When the temperature is reached, the dry glue bulk of the viscosity index agent is decomposed by a crusher and put into the high speed dissolver tank.
The size of the decomposed gel block directly affects the glue melting time and the proportion of sol-insoluble particles.
3) During the dry glue feeding process, continuous heating and mixing are required.
4) After adding glue, the oil temperature should be kept within the proper temperature range.
5) During the glue melting process, the dissolution and temperature changes of the colloidal particles in the dissolver tank should be observed regularly.
6) Wait until the dry glue is completely dissolved.
7) Put diluted base oil into the diluting kettle to lower the glue temperature and reduce the oxidation rate of the oil.
8) Transport the diluted glue solution out of the dissolver kettle. If necessary, put the base oil reserved in advance into the dissolver kettle for flushing, and send the washing oil into the diluted glue solution together, and mix evenly.
 

Detailed Photos

 

 

Other relative products

 

 

FAQ