AE BE CE 200L to 16KL GLR steam/oil Heating/Pressure/Vacuum Enamel Glass Lined/liner Steel Reactor with Steam Jacket with condenser/heat exchanger
K / AE series open type glass-lined reactor is a split type glass-lined steel pressure vessel with agitator, including a kettle body and a detachable lid, the lid is connected by flanges, gaskets and hook-shaped clips And sealed to the main body.
The open-type glass-lined reactor is more convenient to disassemble. If there is a problem with the nozzle on the tank lid, it is easy to disassemble for independent repair or replacement. The heating and cooling method of the kettle body is through the temperature medium such as steam, water and heat transfer oil in the jacket of the kettle body.
Part 1: Technical parameters:
1. Nominal volume: 50-30000 liters (K series); 200-16000 liters (AE series);
2. Design pressure of kettle body: 0.2 Mpa, 0.4 Mpa, 0.6 Mpa, 1.0 Mpa;
3. Jacket design pressure: 0.6 Mpa;
4. Design working temperature: -25 to 200 Deg.C;
5. The thickness of the glass-lined layer: 0.8-2.0 mm (K series); 1.5-2.3 mm (AE series);
6. Glass-lined stirring type (specified): frame type/anchor type, paddle type, impeller type, propeller type, blade combined type, etc.
7. Stirring drive: AC motor (customers need to specify the explosion-proof grade and whether it needs frequency control);
8. Reducer type (specified): vertical;
9. Sealing type: packing seal (0.2 Mpa); single mechanical seal (0.4 Mpa); double mechanical seal (0.6 Mpa, 1.0 Mpa)
10. Working medium: organic acid, inorganic acid, organic solvent and weak alkaline medium (fluoride ion medium, strong
base with pH value greater than 12, and concentrated phosphoric acid with temperature over 180 degrees and concentration over 30%) ;
11. Glass-lined electric spark test: 20KV after enameling, 10KV before leaving the factory. Resistance to sudden changes in temperature: cold
shock: 110 degrees Celsius, thermal shock: 120 degrees Celsius;
12. Manufacturing standards: according to GB/T 25025-2010, GB/T 25027-2010, HG/T 2371-2003 improvement (K series); DIN 28136 (AE series) or
customized according to customer requirements.
Part 2: Main features:
1. Excellent corrosion resistance: The glass-lined equipment is extremely resistant to acid and alkali corrosion (hot concentrated phosphoric acid). Cheng Ming can design a enamel ratio with extremely high corrosion resistance according to the characteristics
of the user's working medium;
2. Anti-adhesion: Many raw materials will not stick to the glass surface, but will stick to the metal surface;
3. Ensure the purity of raw materials: The glass-lined equipment has high quality standards for food and pharmaceutical applications;
4. Flexibility: Glass-lined equipment can handle various chemical conditions;
5. Easy to clean: Glass-lined equipment can be cleaned and disinfected quickly and easily.
6. No catalytic effect: the possibility of catalytic effect that may occur in containers made of various metals is eliminated;
7. Economical: The cost is comparable to stainless steel, and it can partially replace most expensive corrosion-resistant metals, such as
titanium, titanium, tantalum, Hastelloy, etc.;
8. Excellent insulation performance: In the 20KV high frequency spark test, the spark cannot penetrate the glass lining;
9. Heat resistance: thermal conductivity is only 1% to 0.1% of metal;
10. Impact resistance: The impact resistance of Chengming's high-quality products is 260 * 10-3J;
11. Customized design: design and manufacture according to customer's conditions and requirements.
For Standard type glass lined reactor,we will follow these requirements of the National Standardization Committee of the People's Republic of China.
1. "Steel Pressure Vessel" (GB150-2011)
2. "Technical Conditions of Glass-lined Equipment" (GB/T25025-2010)
3. "Welding Rules for Steel Pressure Vessels" (JB/T4709-2000)
4. "Nondestructive Testing of Pressure Equipment" NB/T47013-2015
5. "Regulations on Safety Technical Supervision of Fixed Pressure Vessels" TSG21-2016
6. "Steel plates for boilers and pressure vessels" GB713-2014
7. "Glass-lined open mixing vessel" GB/T25027-2010
8. "Glass-lined closed mixing vessel" GB/T25026-2010
9. "Glass-lined open storage container" HG/T 2373-2011
10. "Glass-lined closed storage container" HG/T 2374-2011
11. "Glass-lined horizontal storage container" HG/T 2375-2011
12. "Steel Chemical Container Material Selection Regulations" (HG20581-1998)
14. "Regulations on Structural Design of Steel Chemical Containers" (HG20583-1998)
15. "Technical Requirements for the Manufacturing of Steel Chemical Containers" (HG20584-1998)
16. "Glass-lined technical conditions" (HG2432-2001)
17. "Order and Conditions of Steel Welding Rods for Pressure Vessels" (JB/T4747-2002)
18. "Steel Pressure Vessels-Analysis and Design Standards" (JB4732-2005)
19. "Glass-lined Blender" (HG/T2051-2007)
20. "Glass-lined equipment transmission device" (HG/T2052-2007)
21. "Mechanical Seal for Glass-lined Stirring Container" (HG/T2057-2003)
22. "Glass-lined equipment looper flange" HG/T 2105-2011
23. "Glass-lined thermometer cover" HG/T 2058.1-2016
24. "Glass-lined equipment clip" HG/T 2054-2007
25. "Glass-lined container parameters" (HG/T2036-2005)
26. "Welding Process Evaluation of Steel Pressure Vessels" (JB/T4708-2000)
27. "Mechanical Performance Testing of Welding Test Plates for Steel Pressure Vessel Products" (JB4744-2000)
28. "Test method for rapid temperature change resistance of glass-lined layer" (GB/T7987-2003)
29. "High voltage test method for glass-lined equipment used under corrosive conditions" (GB/T7993-2003)
30. "Water pressure test method for glass-lined equipment" (GB/T7994-2005)
31. "Test method for airtightness of glass-lined equipment" (GB/T7995-2005)
FAQ
Our Service:
1. PRIS will provide all the machines for the complete production according to customer's requirements.
2. PRIS will provide complete service for factory layout and other information to help customer to build the factory.
3. PRIS will provide good service for machine installation and training, until the customers can run the machines and make stably production.
4. Except one year quality guarantee, we will provide after-sell service for all the life.
5. For long-term cooperation, we always provide good quality, good price and good service to customer.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}