| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Why do you need the horizontal sand mill with polyurethane(PU) liner and what is its features?
Polyurethane elastomer is a new type of polymer composite material between rubber and plastic. It has both the high strength of plastic and the high elasticity of rubber.
Its features are:
1. Wide range of hardness. It still has the elongation and resilience of rubber at high hardness. Polyurethane elastomers have a hardness range of Shore A10-D80.
2. High mechanical strength, their breaking strength and bearing capacity are much higher than general-purpose rubber under rubber hardness. At high hardness, its impact strength and bending strength are much higher than that of plastic.
3. The wear resistance is very outstanding, generally within the range of 0.01-0.10 (cm3)/1.61km, which is about 3-5 times that of natural rubber.
4. Excellent oil resistance. Polyurethane elastomer is a kind of strong polar polymer compound, which has little affinity with non-polar mineral oil, and is hardly corroded in fuel oil and mechanical oil. It is 4 times that of nitrile rubber.
5. Good oxygen and ozone resistance.
6. Excellent vibration absorption performance, can be used for vibration reduction and buffering. In the mold manufacturing industry, it can replace rubber and springs.
7. Has good low temperature performance.
8. Radiation resistance. Polyurethane has good resistance to high-energy rays, and still has satisfactory performance under the radiation dose of 10-10 g.
9. Excellent acid and alkali resistance, low temperature resistance and solvent resistance.
10. The bonding strength with the metal skeleton plate is high, and it can be machined.
Technical data: (Welcome you to supply your materials for trial run!)
| Model | PSM-D-5L | PSM-D-10L | PSM-D-20L | PSM-D-30L | PSM-D-50L | PSM-D-100L | PSM-D-200L | PSM-D-300L | |
| 1 | Grinding chamber capacity | 5L | 10L | 20L | 30L | 50L | 100L | 200L | 300L |
| 2 | Main motor | 5.5KW | 11KW | 18.5KW | 22/37KW | 30/37KW | 45/55KW | 75/90KW | 90/110KW |
| 3 | Length(mm) | 1250 | 1400 | 1650 | 1800 | 1900 | 2000 | 2800 | 3200 |
| 4 | Width(mm) | 650 | 850 | 900 | 900 | 1000 | 1000 | 1200 | 1300 |
| 5 | Height(mm) | 1350 | 1450 | 1450 | 1450 | 1500 | 1900 | 2200 | 2300 |
| 6 | Weight(Kgs) | 320 | 400 | 500 | 650 | 1000 | 1500 | 2070 | 2760 |
| 7 | Separator type | D | D | D | D/S | D/S | D/S | S | S |
We treat every process of design and production with a scientific and rigorous attitude. The laboratory is equipped with a micro-scale sand mill and a nano-scale sand mill for customers to make raw material grinding tests, which is convenient for customers to select models. At the same time, it is equipped with a wet laser particle size analyzer to measure the grinding effect.
){kind=link}