| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Application: | Lubricant Grease |
|
Still deciding? Get samples of US$ 4000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Grease excavator/grease conveyor
The machine has the main function to quickly transport the prepared grease from a 180kg vat to the grease reactor. Usually these grease are not qualified,and need to be processed again.
The conveying speed is 4-8 minutes/barrel (180kg), and the performance is stable and reliable. It can reduce the labor intensity of workers, save time and improve work efficiency. It is an indispensable ideal conveying and sub-packaging equipment for grease production enterprises. The improved fat digger uses the company's patented spherical rotor pump as the booster pump, which has a huge suction pressure, which avoids the shortcomings of the old gear shear pump, such as discontinuous gas delivery and low pressure during the delivery process of the old gear shear pump. The conveying efficiency and lifespan are greatly improved.
Specific operations:
1. Connect the power supply, start the green start button, and see the forward and reverse directions of the motor driven pump.
2. Connect the air source, turn on the air intake switch, and adjust the pressure to about 0.5-0.6.
3. Pull up the lift switch to make the cylinder drive the whole set of fat lifters to rise.
4.Put the barrel filled with grease on the tray under the grease lifter, and push the tray to place it under the grease lifter.
5.Press the lift switch to slowly place the fat lifter in the barrel, and at the same time open the exhaust valve on the fat lifter to release the residual air in the barrel. When the fat lifter comes into contact with the grease, turn off the exhaust switch.
6.Open the rubber ring inflation switch
(Note: The apron inflation switch, in order to make the apron expand and closely match the barrel wall, is more suitable for large barrels with bumps after collision, or when the oil is relatively thin, to prevent the oil from overflowing in the barrel. If the large barrel is relatively regular, the viscosity of the oil is relatively high. large, you can also not use this function.
7.Turn on the power switch, the motor drives the fat pump to rotate, and starts to lift fat.
8.After the oil pump in the barrel is finished, turn off the motor switch, turn on the inflation switch in the barrel to inflate the barrel, and turn on the lift switch at the same time, so that the fat lifter slowly rises out of the barrel until the fat lifter leaves the barrel mouth, close the barrel Inflate the switch, pull out the old barrel, and replace it with a new oil barrel. Repeat the above operation again to carry out liposuction.
){kind=link}