1. The main advantages of bag filter:
1) The probability of side leakage of the filter bag is small, which effectively guarantees the filter quality.
2) The bag filter can bear greater working pressure, with small pressure loss, low operating cost and obvious energy saving effect.
3) The filter accuracy of the filter bag has been continuously improved, and has reached 0.5μm at present.
4) The bag filter has large processing capacity, small volume and large dirt holding capacity.
5) Based on the working principle and structure of the bag filter system, it is convenient and quick to replace the filter bag, and the filter is free of cleaning, saving labor and time.
6) The filter bag can be used repeatedly after cleaning, saving cost.
7) The bag filter has a wide range of applications, flexible use and various installation methods.
2. Bag filter specifications:
The bag filter is divided into: single bag filter, multi-bag filter and sandwich filter. Multi-bag filter, suitable for large flow filtration. From 2 bags to 24 bags, the specifications are complete, the inlet and outlet flange diameter is φ50&mdaCXSQ;450MM, and the single machine has a larger flow rate 90-1000m3/h can provide quick opening design, and the filter bag replacement is very convenient. It is also suitable for occasions where you want to replace the filter bag after a long time.
Heating type bag filter with jacket:
The sandwich bag filter has a double-layer structure. The sandwich can be steamed or heat-conducting oil to maintain or increase the temperature of the fluid, prevent the fluid from solidifying, increase the filtration speed of viscous liquids, or meet the temperature requirements of the next process.
3. Main purpose:
Paint, beer, vegetable oil, medicine, chemicals, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible Oils, fats, etc.
4. Model description:
CXSQL-P1S: used for standard length filter bags with a filter area of 0.25m2.
CXSQL-P2S: used for double standard length filter bags, with a filter area of 0.5m2.
5. Filter operation and matters needing attention:
This machine is easy to operate.When using, you only need to install the filter bag of the required fineness level in the filter cartridge, check whether the O-ring is intact, and then tighten the ring bolt of the filter cartridge cover, and then it can be put into work.
After the pump is started, the pressure gauge on the filter rises slightly, and the initial pressure is about 0.05MPa. With the extension of use time, the filter residue in the cylinder gradually increases. When the pressure reaches 0.4MPa, the cylinder cover should be shut down to check the filter bag residue In case, the filter bag can be replaced and used continuously (the filter bag can generally be reused by cleaning). The pressure of the filter is generally adjusted to 0.1-0.3MPa, which can be adjusted through the return line or the return valve on the pump. Excessive filtration pressure will damage the filter bag and the protection net, so special attention should be paid.
We could supply more type filling machines:
1.No-dust powder filling machine
2.Acrylic emulsion filling machine
3.Stonelike paints/texture paints filling machine
4.Acetic /Neutral type Silicone sealant filling machine
5.Lubricant oil filling machine
6.Lubricant grease filling machine
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}